-
Mobile Version
Scan with Mobile
- Member Center
Product Introduction
The DT-MG-600 is a four-system (Beidou, GPS, GLONASS, GALILEO) integrated monitoring GNSS receiver developed for surface displacement and deformation. Combined with the independent and proprietary multi-point joint positioning algorithm of Da Tie Detection, it achieves high monitoring positioning accuracy. Together with the company's existing edge computing controller and cloud platform, it provides an ideal comprehensive solution for displacement monitoring of structures such as slopes, bridges, and dams.
Product Features
- Adaptive Monitoring
- Multi-observation Value Collection
- Front-end Calculation
- High Integration
- Low Power Consumption Operation
- Quick and Simple Installation
- Strong Environmental Adaptability
Specifications
| Signals | BDS | B1/B2 |
| GPS | L1/L2 | |
| GLONASS | G1/G2 | |
| Static Accuracy | Horizontal | 2.5mm + 0.5ppm |
| Vertical | 5.0mm + 1.0ppm | |
| RTK Accuracy | Horizontal | 10mm + 1ppm |
| Vertical | 15mm + 1ppm | |
| Differential Data Format | RTCM3.X | |
| Storage Capacity | 16GB (expandable up to 256GB) | |
| Communication Features | Wired Communication | RJ45, RS232, RS485 |
| Wireless Communication | NB-IoT, 4G, 5G, WIFI, LoRa | |
| Remote Control | Supports cloud-based remote monitoring, configuration, and upgrades | |
| Electrical Features | Input Voltage | DC 9V~36V |
| Power Consumption | ≤2W | |
| Protection | Reverse polarity protection, overvoltage protection, short circuit protection | |
| Environmental Features | Protection Rating | IP67 |
| Operating Temperature | -40℃~+70℃ | |
| Storage Temperature | -40℃~+85℃ | |
| Humidity | 0~95% non-condensing | |
Long Press to Scan QR Code
Scan QR Code
